www.xprgroup.com
1
Touch button switch
EN
FR IT ES DE NL
TBS
OVERVIEW
INSTALLATION
Introduction
Mounting instructions
WIRING AND APPLICATIONS
FEATURES
SPECIFICATIONS
The TBS-Touch Sensitive Switch is an entirely electronic, non-mechanical and ergonomically designed access control device. It can
either function as an independent manually-controlled push button or alternatively, be connected to a controller to facilitate access
from a secure area. This futuristic device is activated at the lightest of touches and is triggered by the users own static electricity.
With its attractive modern look and die-cast metal body the TBS combines elegance and aesthetics with ruggedness and reliability.
- Feather light touch control
- Works in Pulse and Latch mode
- Ideal for a wide range of applications
- Vandal-resistant
- Resin Potted Electronics
Audio and Visual indications:
- Front dual light indication
- Buzzer sound on every touch
Input voltage:
12-24V DC; 15-24V AC
Current consumption:
max.65mA
Relay Output:
2A@ 24 DC / 120V AC
Indicators-LED:
Normal - RED
Relay Operation – GREEN
Panel Connection:
Cable, 0.5 m
Operating Temperature:
-20oC to 50oC
Operating Humidity:
Non-condensing up to 95%
Dimension (mm):
85W x 116.6L x 22.6H
Housing:
Die-cast Aluminium alloy housing
Touch Plate:
Mild steel painted
Protection: IP66
1. Identify a suitable location on wall or flat surface.
2. Stick the Drilling Template provided on chosen location. Drill 3 holes as indicated in the diagram.
3. Insert 3 nos. of 6 mm wall plugs provided into the drilled holes.
4. Route the cables through the holes provided in the BackPlate.
5. Fix the Backplate firmly on the wall using 3nos. of 4x30mm CSK screws
6. Connect wires.
7. After wiring, place the Housing over the fixed backplate and guide the slot into the backplate tab and slide it downwards.
8. Fix the Housing to the Back-Plate with a M3 x 6 mm Security Screw on the bottom of the Housing using a Security Screwdriver provided.
I
mportant Note:
Several layers of protection are provided against transient voltages from static discharge,
lightning and power supply spikes. For protection to be fully effective, earthing should be done correctly.
- Light switches
- Exit button (Access control)
- Elevator buttons
- Industrial panels
v.
d1
