B&G NEMESIS, Installation Manual

Page: 1 / 11

*988-12791-001*
NEMESIS™ HUB
INSTALLATION GUIDE
Parts included
A.
Ethernet switch
B.
Fastening set
C.
Display connection cable
D.
Blanking caps (not shown in the illustration)
Compliance statement
Declarations
The relevant Declaration of Conformity is available on the
following websites:
•
www.bandg.com
Europe
Navico declares under our sole responsibility that the
product conforms with the requirements of:
•
CE under EMC Directive 2014/30/EU
United States of America
¼
Note: The user is cautioned that any changes or
modifications not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
Australia and New Zealand
Navico declares under our sole responsibility that the
product conforms with the requirements of:
•
level 2 devices of the Radiocommunications
(Electromagnetic Compatibility) standard 2017
Trademarks
®Reg. U.S. Pat. & Tm. Off, and ™ common law marks. Visit
www.navico.com/intellectual-property to review the global
trademark rights and accreditations for Navico Holding AS
and other entities.
Dimensional drawing
Mounting
151.64 mm
(5.97”)
52.75 mm
(2.08”)
98.61 mm
(3.88”)
275.8 mm
(10.86”)
187.5 mm
(7.38”)
A
B
C
1 2
3
Technical specification
Environmental
Storage temperature -15°C to +55°C (5°F to 131°F)
Operating temperatur -20°C to +60°C (4°F to 140°F)
Waterproof rating IPX 6 and 7
Electrical
Power supply 12/24 V DC
Operating voltage 12/24 V DC (10 - 31.2 V DC
min - max)
Power consumption - Max 2 W + power distributed to
connected displays.
Fuse rating 6 A
Physical
Weight (box only) 240g (0.44 lbs)
Interface/Connectivity
Ethernet/Power 1x 8-pin connector
Display 3x 8-pin Ethernet connectors
Ground 1x M4 Grounding
A B
A.
Power and Ethernet cable
B.
Display connector cable
Accessories (sold separately)