Quick
Setup
Guide
Features
Installation
and
Operation
KIT-TT4PVTURBO
KIT-TT8PVTURBO
KIT-TT16PVTURBO
Before permanently securing the unit for final installation of cabling
behind walls or ceilings, test for proper operation of the unit and the
cables in your system.
Camera End:
Connect transmitter to the camera’s
video and
DC power connector. Insert UTP
cat5e/6 into RJ 45
j
ack
of transmitter
.
Power
Video
RJ45
DVR
End
:
There’re RJ45 jack labeled “UTP In”
and Female BNC
connectors labeled “BNC out”
on the receiver hubs.
UTP
IN
BNC OUT
Insert one end of coaxial patch cord into Female BNC connectors of receiver’
hub and the other end into Female BNC connectors of DVR.
60cm Coaxial cable
Terminate the incoming UTP cat5e/6 cable from
t
ransmitter
into
your RJ45 jack of 4/8/16 Video & Power Receiver hubs.
DVR
Step 1: Begin with all input/output devices turned off with power cables removed.
Step 2: Connect video source and
UTP
cat
5
e
/6 cabling to transmitter
Step 3: Connect video display and/or DVR to “BNC output”
of Receiver Hub
Step 4: Terminate the incoming UTP
cat5e/6 cable into your RJ45
jack
“UTP In”
(See RJ 45
jack
Pin Assignment)
Step 5: Power on all input/output devices
Application Example
TransReceiver Hub(36VDC)
Power
Video
Power
Video
12VDC Camera
12VDC Camera
Transmitter: c
onvert 36VDC to regulated 12VDC at
camera
Power
Supply
HD
Video
Receiver
Hub
Receiver
Receiver Hub
DVR
Transmitter
Switch on the Video & Power Receiver Hub using the on/offf switch.
Multi-Channel 36VDC Power Supply
HD-TVI/CVI/AHD/CVBS 4 in 1 Video Receiver Hub
Provides camera power while receiving video transmission
both over one single 4-pair UTP cat5e/6 cable
No additional power supply needed for cameras
Transmit 36VDC power up to 1000ft /305m working
with transmitter
(convert
36
VDC
into
regulated
12
VDC
) for 12VDC camera
Female BNC connector and RJ45 Jack
Real-time transmission
Exceptional interference rejection
Ground loop isolation
Built-in TVS for surge protection
Lightning protection design Grade:
Ⅲ
Wave Filter Design, Anti-Static Design
Compatible with all HD-TVI, HD-CVI, AHD & CVBS analog cameras
Color video max up to 440m(1443ft) for HD-CVI 720P camera
If you adjust saturation of DVR, max up to 470m(1541ft)
Color video max up to 230m(754ft) for HD-CVI 1080P camera
Color video max up to 190m(623ft) for Hikvision TVI 720P camera
Color video max up to 190m(623ft) for Hikvision TVI 1080P camera
Color video max up to 230m(754ft) for TVT HD-TVI 720P camera
Color video max up to 220m(721ft) for TVT HD-TVI 1080P camera
Color video max up to 320m(1049ft) for AHD 720P camera
Color video max up to 320m(1049ft) for AHD 960P camera
Color video max up to 250m(820ft) for AHD 1080P camera
Color video max up to 400m(1312ft) for CVBS camera
