![background image](http://html1.mh-extra.com/html/ablenet/100dslat/100dslat_quick-start-manual_3449194001.webp)
Quick Start Guide
Dual Switch Latch and Timer
www.ablenetinc.com
1-800-322-0956
Product Overview
PN 9008009 (02/20 Rev. C - FN 70500212)
Use
Required but not included:
Single Switch(es)
9-Volt Alkaline Battery
Switch Adapted Toy or Appliance
Switch 2 - In
Plug to Plug adapter
to Toy for Switch 2
Mode Switch
Timer Adjust
Battery Compartment
Timed Seconds
- The Timed Seconds mode allows for the
toy or appliance to run for a preset amount of time with a
single activation.
Timed Minutes
- This mode behaves exactly like the Timed
Seconds mode, but uses minutes rather than seconds.
Latch
- One activation of a switch turns the toy or appliance
on; the second activations turns it off. Use the Latch mode
when you want a toy or appliance to remain on indefinitely.
Switch 1 - In
Cable to Toy for Switch 1
Plug to Plug Adapter
1/8” (3.5mm) phone plug both sides
Most switches give switch users momentary control of their
switch adapted toys or appliances. Meaning, when you press
your switch, your toy or appliance will operate only for the
time that you are holding down the switch. The Dual Switch
Latch and Timer gives switch users more control of their
devices by adding time and latch modes of control.
Setup
1. Install 9-Volt Battery
2. Plug switch in Switch 1 - In jack or Switch 2 - In jack.
3. If your switch is plugged into Switch 1 - In jack then plug
built-in cable into your switch adapted toy or appliance. If
your Switch is plugged into Switch 2 - In jack then use Plug
to Plug Adapter to go from the Dual Switch Latch and Timer
to your switch adapted Toy or appliance.
4. Chose your mode of control using the Mode Switch.
5. Adjust the time you want your toy or appliance to operate
with the Timer Adjust knob when in Timed Sec Mode and
Timed Min Mode.
Modes, Tips, and Tricks
Recommend using 9-Volt alkaline batteries only.
Check battery if Switch Latch and Timer is acting erratically.
You can setup two switches into the Switch Latch and timer.
The switches will operate their corresponding toy or appliance
independently of each other in the same mode of control.
The Timer Adjust knob shows approximately how long the toy
or appliance will activate. It is not an exact indication.