Smart Home Control Hub
Quick-Start Guide
CLIQ.mini
Support
Warranty Information
Clare Controls offers a three (3) year limited warranty on
original Clare Controls components, from the date of
shipment from Clare Controls. To view complete limited
warranty details, including limitations and exclusions,
www.clarecontrols.com/warranty.
Scan the code to view
product warranty details.
Doc ID: 2018-03-1284-06
www.clarecontrols.com
For technical issues and additional support, please
contact Clare Technical Services at:
Additional Information and Support
Product Information
Additional Information
Installation and Setup Manual:
www.clarecontrols.com/mini-techguide
(1)
Recessed push button
(2)
2 USB ports
(3)
Wire routing channel
(4)
Wall mount slot
(5)
Micro USB port
(6)
Ethernet port
LED Indicators
When the CLIQ.mini reboots, it can take up to 25 seconds
to successfully restart in AP mode.
To shut down the CLIQ.mini, use the provided paper clip
to press and hold the recessed push button down for 5
seconds.
To shut down and power
cycle the CLIQ.mini in AP
mode, use the provided
paper clip to press and
hold the recessed push
button down for 20
seconds.
LED Display
Troubleshooting
Solid blue
Everything is working correctly.
Blinking red in 2
second intervals
The CLIQ.mini is not connected to
your home network. Shut down and
power cycle the CLIQ.mini.
Solid red
ClareOS is not operational. Shut down
and power cycle the CLIQ.mini.
Not lit
There is no power connected to the
CLIQ.mini. Check that the power supplies
are plugged in and wired correctly.
Blinking red
and blue
Firmware update in progress can
take up to 5 minutes.
