Siemens 6MD85, Manual

Page: 469 / 1256

[lo_proxy-logic-part_02, 1, en_US]
Figure 6-135 Logic of the Parallel-Control State Detection
Controlling Locally/Remote
The parallel control can be done by setting or via the control. With the parameter setting
controllable
,
with a CFC block, you can also use a binary input and the status signal of a circuit breaker ( Figure 6-138 ).
First, for the control of the parallel control, set the parameters
Parallel mode changeable
and
Force
master changeable
.
You can select one of the 2 options:
•
by setting
•
controllable
[sc_para_oper_change, 1, en_US]
Figure 6-136 Selection for Parallel Control
If you set
Parallel mode changeable
to
controllable
, you can read and change the settings for the
parallel control on the device under the following path:
•
Main menu → Commands → Functionality → Voltage cont. 2w1 → Operation
Control Functions
6.9 Voltage Controller
SIPROTEC 5, High-Voltage Bay Controller, Manual 469
C53000-G5040-C015-9, Edition 11.2017