Siemens 6MD85, Manual

Page: 342 / 1256

[sc_act additional options sw authority, 3, en_US]
Figure 6-32 Activating Additional Options of the Switching Authority
The additional parameters allow you to set the following options:
•
Specific sw.auth. valid for
(for
station/remote
, only
remote
or only
station
):
With this parameter, you determine for which command source the extended switching-authority check
is used.
Table 6-21 Result Derived from the Combination of the Parameter Value
Specific sw.auth. valid
for
and the Level of the Command Source (Field
Originator/orCat
of the Switching
Command)
Command Source
Specific sw.auth. valid for
station
station/remote remote
Local, local automatic No check No check No check
Station, station automatic Check Check No check
Remote, remote auto-
matic No check Check Check
DIGSI No check No check No check
Control Functions
6.3 Control Functionality
342 SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-9, Edition 11.2017