Siemens 6MD85, Manual

Page: 148 / 1256

Manual updating of the switching device is possible from within the same menu.
•
Select Manual update ( Figure 3-84 ) using the navigation keys.
•
With the navigation keys, select the switching-device setting to be updated manually (for example, off,
Figure 3-85 ).
•
Confirm the process with the softkey marked OK in the display.
[scstatus-310816-01, 1, en_US]
Figure 3-84 Activating the Manual Update
[scstatu2-310816-01, 1, en_US]
Figure 3-85 Selecting Position
The manually updated position of the switching device will be displayed.
[scstatu3-310816-01, 1, en_US]
Figure 3-86 Position of the Switching Device
i
i
NOTE
For safety reasons, manual updating is possible only directly through the on-site operation panel of the
device and not through DIGSI 5.
i
i
NOTE
Setting acquisition blocking and the subsequent manual updating are also possible via the IEC 61850
system interface.
You can also set the acquisition blocking via a binary input. If you want to put the feeder or the switching
device in revision, you can set the acquisition blocking for an individual or several switching devices with an
external toggle switch. For this purpose, every switching device in the Switch function block (circuit breaker
or disconnector switch) has the input signal
>Acquisition blocking
. This signal can also be set from the
CFC.
System Functions
3.8 Other Functions
148 SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-9, Edition 11.2017