GE Healthcare
Senographe DS
Revision 1
Service Information and Procedures Class A 2385072-16-8EN
Job Card ELE A020 - Declare and Set Printers (Filming Devices)
Page no. 619
Chapter 7
JC-ELE-A-020.fm
4. In the fields
Ambient Room Light
and
Light Box Light,
type the values corresponding to the printer
you will use in this review room (see table below).
Use the
Clear
button if you need to reset the values you entered.
5. Click the
Save
button.
The new review room name appears in the
Review Room Selection
window.
6. Click the
Cancel
button to close the
Review Rooms Parameters
window.
Printer Model
Ambient Room Light
Light Box Light
Carestream 5850 (see Note 2)
10
5000
Carestream 6850 (see Note 2)
10
5000
Kodak 6800 (see Note 2)
10
5000
Kodak 8900 (see Note 2)
10
5000
Kodak 8600
10
5000
Kodak 8610
10
5000
Konica 793
1
4000
Konica 873
1
4000
Agfa 4500 M
10
4000
Agfa 5500
10
4000
Agfa 5503
10
4000
Agfa AXYS
1
4000
Fuji DryPix 4000
10
4000
Fuji DryPix 5000
10
4000
Fuji DryPix 7000
10
4000
SONY UP-DF750
10
4000
Fuji DryPix FMDPL
1
2300
Note 1:
If your printer is not listed in this table then contact your GEMS Service Representative for
the recommended values for your printer.
Note 2:
To match new AFSSAPS requirements (in France) for Ambient Light=1 & Illumina-
tion=4000, do not set Review Room into Review Room Management, and check with the printer
manufacturer that the printer is correctly configured.
