NEC SV8500, Manual

Page: 2219 / 3438

VOL.2-1966
VS-32 Conference Server
The Maintenance Console uses the commands listed in .
List of Setup Command
List of Set Command
List of Show Command
List of Save Command
List of INIT Command
List of REBOOT Command
List of GET Command
COMMAND No. SUB COMMAND FUNCTION
SETUP
1 IP Setting Basic IP data .
2 WAVEFILE Downloading Wave Sound File .
COMMAND No. SUB COMMAND FUNCTION
SET
1 DEFAULTROUTE
Setting Default Gateway in System Data of VS-32 Confer-
ence Server:
2 DHCP Setting DHCP:
3 DRSADDRESS Setting IP address and port number of DRS
Note 1
,
Note 2
:
4 DRSTOS Setting ToS of DRS session:
5 INTERFACE
Setting Interface transmission speed of VS-32 Conference
Server:
6 IPADDRESS
Setting IP Address and Net Mask in System Data of VS-32
Conference Server:
7 PORTNUMBER Setting Port Number:
8 VLAN Setting VLANs:
COMMAND No. SUB COMMAND FUNCTION
SHOW
1 COUNTRYCODE To show Country Code:
2 DHCP To show DHCP setting:
3 DRSADDRESS To show DRS Address and Port Number
Note 1
:
4 DRSTOS To show TOS setting of DRS session:
5 INTERFACE To show setting and status of INTERFACE:
6 IPADDRESS
To show the registered IP Address, Net Mask, and Default
Gateway:
7 PORTNUMBER To show settings of each port:
8 VERSION To show the Firmware and Hardware Information:
9 STATUS To show the status of VS-32 Conference Server:
10 VLAN To show VLAN settings:
COMMAND No. SUB COMMAND FUNCTION
SAVE
1 CONFIGDATA
To save the configuration data to VS-32 Conference Server
internal Flash ROM:
2 WAVE FILE
To save wave sound files to VS-32 Conference Server internal
Flash ROM:
COMMAND No. SUB COMMAND FUNCTION
INIT
1 CONFIG To initialize Configuration Data to the factory default setting:
COMMAND No. SUB COMMAND FUNCTION
REBOOT
1 - To reboot the VS-32 Conference Server:
COMMAND No. SUB COMMAND FUNCTION