NEC SV8500, Manual

Page: 614 / 3438

VOL.2-361
MCMG [SCA-4LC2COTA/MG-4LC2COTA]
COMMAND No. SUB COMMAND FUNCTION REMARKS
SET
(MG side)
1 CALL_HOLD Setting Call Hold
2 CAR_DETECT Setting CAR Detection
3 CODEC_COEF_MG Setting CODEC Coefficiency
4 DSP_ECFB_MG Setting DSP echo canceller for FAX communication
5 DTMF_CUTOFF_TIME Setting DTMF Cutoff Timer
6 EC_TRAINING_MG Setting Training feature mode of echo canceller
7 FAXERRORDETECT_MG Setting the FAX enable timer
8 FAXRECVPAD_MG Setting FAX receiver PAD value
9 FAXSENDPAD_MG Setting FAX sender PAD value
10 IC_ABANDON_TIME Setting I/C call abandon timer
11 NO_LOOP_TIME Setting Loop Prohibition timer
12 RELEASE_SIGNAL Setting Release Signal
13 RTP_STOP_DETECT Setting RTP Reception Timer
14 SMOOTH_PAD_MG Setting DSP smooth PAD mode
15 RVS_AUST Setting RVS mode (for Australia)
16 AUTO_POLARITY Setting Auto Polarity
COMMAND No. SUB COMMAND FUNCTION REMARKS
SHOW
(both MC and
MG sides)
1 DHCP To show DHCP setting
2 DRSADDRESS To show DRS Address and Port Number
3 DRSTOS To show ToS setting of DRS session
4 HC_TIMER To show Health Check Receive Timer
5 INTERFACE To show communication speed for LAN interface
6 IPADDRESS To show IP Address, Subnet Mask, and Default Gateway
7 STARTPORT To show RTP Start Port
8 VERSION To show the version information
9 VLAN To show VLAN setting
10 WARNING_TONE To show Warning Tone control
COMMAND No. SUB COMMAND FUNCTION REMARKS
SHOW
(MC side)
1 BURSTPATTERN To show Burst Ringer Pattern
2 CODEC_COEF To show CODEC Coefficiency
3 DSP_ECFB To show DSP echo canceller for FAX communication
4 EC_TRAINING To show Training feature mode of echo canceller
5 FAXERRORDETECT To show FAX enable timer
6 FAXRECVPAD To show FAX receiver PAD value
7 FAXSENDPAD To show FAX sender PAD value
8 MUSICTYPE To show Internal Music-on-Hold type
9 OPEN To show Open/Reverse mode
10 PAD To show default receiver PAD value
11 PRERINGING To show Pre-Ringing
12 RINGFREQ To show frequency of Ringer
13 SENDPAD To show default sender PAD value
14 SMOOTH_PAD To show DSP smooth PAD mode
15 STUTTERDT To show Stutter Dial Tone
16 SYNCRINGING To show synchronous Ringer