NEC SV8500, Manual

Page: 2084 / 3438

VOL.2-1831
MG-SIP16 [SCA-16SIPMGA/MG-16SIPMGA]
SHOW COMMAND
1 SHOW Δ ARP
This command is used to show the Address Resolution Protocol (ARP) table. The following shows a sam-
ple display.
Note:
The actual value may differ from this sample.
2 SHOW Δ CONFIG
This command is used to show the configuration that has been currently specified for the MG-SIP16.
When MAC Data (=0) is selected:
MG(SIP) > show arp
LINK LEVEL ARP TABLE
Destination LL Address Flags Refcnt Use Interface
-----------------------------------------------------------------------
90.0.0.63 08:00:3e:23:79:e7 0x405 0 82 lo0
-----------------------------------------------------------------------
MG(SIP) > show config
0=MAC Data
1=DRS Data
2=Common Config Data
3=Port Config Data
4=SIP Config Data
5=Route Config Data
9=Exit
Please choose a reference number:_
• Select a desired item (0 - 9) to display.
MG(SIP) > show config
0=MAC Data
1=DRS Data
2=Common Config Data
3=Port Config Data
4=SIP Config Data
5=Route Config Data
9=Exit
Please choose a reference number:0
Ether[1] MAC address: 00-00-00-00-00-00
Ether[2] MAC address: 00-00-00-00-00-00
• When MAC Data (=0) is selected:
• MAC address of Ether [1] of MG-SIP 16
• MAC address of Ether [2] of MG-SIP 16