NEC SV8500, Manual

Page: 2239 / 3438

VOL.2-1986
VS-32 Conference Server
ERROR MESSAGES
When an error occurs using the maintenance commands, the following error messages are displayed. This mes-
sage will help you find solutions.
List of Error Messages
ERROR MESSAGE CAUSE/SOLUTION
Command not found.
A command other than the supported command was entered.
Enter the supported command.
Entered parameter is illegal.
A parameter other than expected is entered.
Enter the parameter of correct value.
Illegal address form.
The form of the entered address is different.
Enter with the correct address format.
Too many parameters.
Illegal parameter was assigned.
Confirm if the entered parameter is required.
Out of memory range.
Out of memory range.
Specify the correct address area.
Please enter sub command.
Required sub command has not been entered.
Enter the required sub command.
Parameter is out of range
The specified range of parameter is illegal.
Confirm the range of data entered.
Sorry, the system data files (sysdata) looks corrupt-
ed! You may initialize system data with ‘INT CON-
FIG’ command. The system data file is corrupted.
Initialize the system data using the “INIT CONFIG” command.
Sub command not found.
The entered sub command is not supported.
Enter the supported sub command.
This command cannot be distinguished.
The system cannot recognize the entered command.
Enter the supported command.
This command cannot Normal end.
The command did not end correctly.
Confirm the following:
1. Is the file name correct?
2. Does the file really exist?
3. Is the Section name and Key name of the Save destination correct?
4. Is the IP address of Download Host correct?
This command needs a parameter.
A required parameter has not been entered.
Enter the required parameter.
Entered character is illegal. Please enter once again
from the beginning.
The illegal character was entered.
Confirm there is no illegal character and enter again.
Password is unmatched The password is incorrect.