NEC SV8500, Manual

Page: 2095 / 3438

VOL.2-1842
MG-SIP16 [SCA-16SIPMGA/MG-16SIPMGA]
When IPX status (=1) is selected:
Note 2:
Display pattern is as follows depending on the registration status.
- During Registration: Now Registering
- Registration Succeed: Registration Done.
(The IP address succeeding in registration appears as well.)
When SIP status (=2) is selected [Multi Registration Mode is disabled]:
Note 3:
Displayed message for each registration status is as follows:
Port Status IPX Network
SIP Network
100M/Half
IPX port link up (100Base-TX/Half) SIP port link up (100Base-TX/Half)
100M/Full
IPX port link up (100Base-TX/Full) SIP port link up (100Base-TX/Full)
10M/Half
IPX port link up (10Base-TX/Half) SIP port link up (10Base-TX/Half)
10M/Full
IPX port link up (10Base-TX/Full) SIP port link up (10Base-TX/Full)
Link Down
IPX port link down SIP port link down
MG(SIP) > show status
0: Port status
1: IPX status
2: SIP status
9: Exit
Please choose a reference number:1
MG(SIP) > IPX Registration Information
Registration Done. (DRS IP address 172.16.253.1)
When IPX status (=1) is selected:
Note 2
MG(SIP) > show status
0: Port status
1: IPX status
2: SIP status
9: Exit
Please choose a reference number:2
MG(SIP) > IPX Registration Information
Registration Done. (DRS IP address 172.16.253.1)
When SIP status (=2) is selected:
Note 3
Status Displayed Message
Remarks
During Registration
Now Registering.
Registration Succeed
Registration Done.
Registration Failed
Registration NG. Waiting Re-Registration timer.
Registration Invalid
Registration Server Configuration data is not setting.
No data has been assigned by
using
set sip_register command.