NEC SV8500, Manual

Page: 1292 / 3438

VOL.2-1039
MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]
• For Q-SIG Trunk Data
The other data should be “0” (default data).
Note 3:
Depending on the level diagram of the network, data “4” is standard.
Note 4:
Each office must be assigned a different value to avoid collision at the time of call origination.
Note 5:
Assign “1” when the number display on LCD of terminal is required.
Note 6:
ACDD is not available if DC = 15.
Note 7:
Assign “1” when the User-to-User Signaling notification is required.
Note 8:
Assign “1” when the multi-rate bearer service is used.
Note:
To provide the system with channel negotiation, see 7. Q-SIG CHANNEL NEGOTIATION in Chapter 3 of
Data Programming Manual - ISDN.
RT=20 (Virtual Speech Channel)
CDN 2 (ONSG) = 2
4 (INSG) = 2
5 (TF) = 3
6 (TCL) = 4
7 (L/T) = 1
8 (RLP) = 2
15 (LSG) = 12
28 (ANS) = 1
30 (PAD) = 4 Note 3
31 (OGRL) = 1
32 (ICRL)
= 1
34 (GUARD) = 1
45 (A/D)
= 1
49 (TRKS) = 0/1 Note 4
50 (DPLY) = 1 Note 5
60 (TC/EC) = 1
65 (INT)
= 10
66 (DC) = 15 Note 6
113 (UUI) = 1 Note 7
118 (BOB) = 1 Note 8
RT=10 (Virtual Signaling Channel)
CDN 2 (ONSG) = 2
4 (INSG) = 2
5 (TF) = 3
6 (TCL) = 4
7 (L/T) = 1
15 (LSG) = 13
30 (PAD) = 7
31 (OGRL) = 1
32 (ICRL)
= 1
34 (GUARD) = 1
45 (A/D)
= 1
65 (INT) = 10
118 (BOB) = 1 Note 10