NEC SV8500, Manual

Page: 2151 / 3438

VOL.2-1898
MG-SIP16 [SCA-16SIPMG(US)]
[To Assign Gateway Address only]
Note 4:
Pressing any key other than “y” displays the following message.
Note:
Two or more Default Gateway cannot be registered.
Note:
To set a default gateway, it should be assigned to either LAN side port or SIP network side port.
MG(SIP) > set ipx_route
Route type(0: Exit/1: None/2: Static): 2
Select command (0: Exit/1: Set/2: Delete): 1
Select gateway type (0: Exit/1: Gateway/2: Default gateway): 2
Gateway IP address(0.0.0.0): 192.168.0.254
Route type: Static
Gateway address | Destination network / Prefix
--------------------------------------------------
192. 168. 0. 254 | 0. 0. 0. 0 / 0
Are you sure? Y/N=y
MG(SIP) > _
• When Static (=2) is selected
• Select 1 to set the data.
• Select Default gateway (=2) as a gate-
way type.
• Specify the default gateway IP
address (default: 0.0.0.0).
• Enter “y” to set the data.
Note 4
Route setting command was interrupted.