NEC SV8500, Manual

Page: 1160 / 3438

VOL.2-907
MG(BRI) [SCA-2BRIA/MG-2BRIA]
F
Setting IP Address, Port Number, and Host Name of SIP server
Note:
This setting is required when DNS server is “D (disable)”.
Note 1:
About IP address of SIP server (Telephony Server), refer to “Registration Destination of IP Devices/Sta-
tions” in INTRODUCTION of Installation Manual.
--- SIP Server IP Address & Host Name set ---
Current SIP Server/IP Address/Port Number/Host Name:
SIP Server
1
2
3
:
:
20 IP Address
0.0.0.0
0.0.0.0
0.0.0.0
:
:
0.0.0.0 Port Number
5060
5060
5060
:
:
5060 Host Name
blank
blank
blank
:
:
blank
Change SIP Server Information? [Y(change)/N(current)/Q(quit)]: Y
Input new SIP Server (1-20): 1
Input new IP Address: 10.41.1.200
Input new Port Number: 5060
Is there the Host Name? [Y/N]: Y
Input new Host Name: SVR1.nec.com
Continue? [Y(continue)/N(exit)]: N
Line 4~Line 9: The current setting of SIP server (IP address, port number, and host name) is
displayed.
Line 10: Asked whether to change the displayed setting.
Y=change
N=not change
Q=quit this setting
Line 11: Enter the number of SIP server [1-20]
Line 12: Enter the IP address of SIP server (e.g. 10.41.1.200)
Note 1
Line 13: Enter the port number of SIP server (default=5060)
Line 14: Asked whether to use host name.
Y=Use host name
N=Not use host name
Line 15: Enter new host name of SIP server in full-domain format.
Up to 63 characters of alphanumerics, “. (period)”, and “- (hyphen)” is available.
Line 16: Asked whether to continue the setting of other SIP server.
Y=Continue to register other SIP server
N=Exit this command and move on to the next command setting