NEC SV8500, Manual

Page: 1764 / 3438

VOL.2-1511
MG-SIP128 [MG-128SIPMGJ]
(27) keynumber
Setting of the pilot number for MG-SIP128 [MG-128SIPMGJ]
The command is used to assign a pilot number of MG-SIP128 [MG-128SIPMGJ] for registration.
[Setting Example]
Note: Be sure not to enter a blank character to the end of the pilot number (with the Copy and Paste fea-
tures of your personal computer), and be careful not to mistype a character. (“0”(zero) or “O”
(alphabetical O), for example.)
(28) mp_data
Addition or deletion of Multipoint data table
The command is used to add or delete Search Number for Multipoint data table. After setting this com-
mand, execute “set_mp_refresh” for reflecting this setting without system restart.
[Setting Example]
MG(SIP) > set keynumber
Input Keynumber.(default=0, MAX32(strings))
:0 Assign the pilot number when
register is performed (Default:
0).
MG(SIP) > set mp_data
Select the method to operation.
0 : Exit
1 : Set
2 : Delete
Input:1
0 : Exit
1 : Set
2 : Delete
Input Search Number.(number of digits=7)
: 1230200
Search Number 1230200 is no data.
Input the Search Number.
When the entered number is
already entered, the existing set-
ting is displayed.
Note 5
Edit this data. Are you sure? (y/n) : y When adding the number, select
“y”.
Input Group Name.(MAX10(strings))
: tokyo1 Input Group Name.
Input Primary Dest IP
Address.(default=0.0.0.0)
: 192.168.x.xx
Input Primary IP address.