NEC SV8500, Manual

Page: 2074 / 3438

VOL.2-1821
MG-SIP16 [SCA-16SIPMGA/MG-16SIPMGA]
31 SET Δ REGISTRATION _ PORT_NO
This command is used to specify the UDP port number that receives the registration packets.
32 SET Δ REG_INTERVAL
This command is used to assign the retry waiting time when failed to register, due to the error-response or
no answer from the server when a Register packet was sent to SIP server from MG(SIP).
Note:
Assign this command adjusting to the specification on SIP network.
When registration per number function is effective, assign by setting MG(SIP) using the largest number
within the same MG(SIP) group referring to table below.
33 SET Δ RTP_PATHON
This command is used to assign Path-on function by 183Progress after receiving 180Ringing.
Note:
Assign this command adjusting to the specifications on the SIP network.
MG(SIP) > set registration_port_no
Registration port number (1024-65535): 3456
• Assign the port number (default: 3456).
MG(SIP) > set reg_interval
REGISTER Interval timer (1-255min(default=5min)): 5
• Assign the registration retry waiting time.
Re-register waiting time (min): (default: 5min)
Amount of Numbers Time (minute)
1-300 5
301-600 10
601-900 15
901-1000 20
MG(SIP) > set rtp_pathon
Path-on 183 after 180?(0: disable/1: enable(default=0)): 0
• Assign Path-on function data.
0: disable (default)
1: enable