NEC SV8500, Manual

Page: 1571 / 3438

VOL.2-1318
MG-T1(SIP) [SCA-24DTIA]
Note:
To make this assignment effective, execute the SAVE command and restart before exiting the maintenance
command.
12. SET
Δ
OWN_NAME
Δ
P1
This command is used to specify a host name of MG-T1(SIP).
Note:
To make this assignment effective, execute the SAVE command and restart before exiting the maintenance
command.
13. SET
Δ
LOOPBACK
Δ
P1
This command is used to specify loopback data for T1.
Note:
The trace of Loopback test varies depending on its setting. The following describes its loopback traces.
(1) Local Loopback
T1 line interface part of MG-T1(SIP) sends back all the channels to LAN side. The counter office de-
tects circuit failure (AIS).
MG-T1(SIP)> SET OWN_NAME mgt1.nec.com P1 : Enter the host name of MG-T1(SIP) in full-
domain format. [Max 63 bytes of alphanumeric
characters, . (period), and - (hyphen)]
e.g. mgt1.nec.com
Own name setting succeeded. Result is displayed.
MG-T1(SIP)> SET LOOPBACK
Loopback (0:OFF/1:LOCAL/2:LINE/3:PAYLOAD)[0]: 1
Enter 0~3
0 =OFF
1 =Local Loopback is ON
2 =Line Loopback is ON
3 =Payload Loopback is ON
Loopback setting succeeded.
Result is displayed.
LAN interface
speech path control part
T1 line interface
IP network
T1
PSTN
(2) Line loopback
(1) Local loopback
Speech Path
(3) Payload loopback
T
T
R
R
MG-T1(SIP)