NEC SV8500, Manual

Page: 2932 / 3438

VOL.3-445
CHAPTER 4 CONFIGURATION SETUP
1.4.8 How to Register MAC Address onto the Telephony Server
MAC address can also be registered onto the Telephony Server from the terminal when initially connecting the
terminal to the LAN and turning ON the power of the terminal. At this time, MAC Registration Password must
be assigned by the ADTM command.
Login
Passwd
Note
Cancel BK Set OK
Login
Passwd
STEP 2: Enter Station Number and press Set key.
STEP 1: Connect the terminal to the LAN and turn ON the power of the terminal. A Login prompt appears
on the LCD.
STEP 3: Enter MAC Registration Password (pre-assigned by the ADTM command) and press OK key.
STEP 4: Station Number and MAC address of the terminal are registered onto office data.
After a while, the current time is appeared on the display, indicating that the terminal is in service.
Login
Passwd
Note
The entered password is indicated in a string of "*" on the display.
START
END
7:35 AM MON 27 AUG 2000
MIC DND >>>
LOGIN
PASSWD
maximum 16 digits (0-9, * and #)
4-10 digits (0-9, * and #)
Note:
This display varies according to the system.
:
:
:
:
3111
3111
******
:
:
In the example here, "3111" is entered as Station Number.
Cancel BK Set OK
Cancel BK Set OK