NEC SV8500, Manual

Page: 695 / 3438

VOL.2-442
MCMG Card [SCA-7COTA]
SETTING OF TYPE OF SERVICE (VOICE PACKET)
Type of service for MG (COT)
SETTING OF PAYLOAD
PAYLOAD TYPE
PAYLOAD SIZE
[4] MC Data Assignment
Assign the system data, according to the station numbering plan. Refer to the following for the prerequisite min-
imum data.
ASYD: Assignment of System Data
SYS1, INDEX 4, b2-b3
Assign the Releasing Method for Station-to-Station Calling Service
00 = Calling Party release
01 = Called Party release
10 = First Party release
11 = Both Party release
Normally, “10” = First Party release is assigned.
SYS1, INDEX 16
Assign the number level on station number composition
b0: 0/1 = 1-digit station number is not used/used
b1: 0/1 = 2-digit station number is not used/used
b2: 0/1 = 3-digit station number is not used/used
b3: 0/1 = 4-digit station number is not used/used
b4: 0/1 = 5-digit station number is not used/used
SYS3, INDEX 0
Assign the ringing pattern when a call from the C.O. line terminates to a station. Normally, “21” is assigned
in hexadecimal (1 second ringing, 2 second pause).
For details, refer to the Command Manual.
SYS3, INDEX 1
Assign the ringing pattern when a station is called from another station (Ringing Pattern 1).
Normally, “42” is assigned in hexadecimal (2 second ringing, 4 second pause).
For details, refer to the Command Manual.
SYS3, INDEX 2
Assign Station Release Timer (TS - release timing when connected to an ORT) and Hooking Timer (TL -
SHF maximum timing). Normally, “91” is set in hexadecimal (TS = 120 milliseconds, TL = 1,080 milli-
seconds).
For details, refer to the Command Manual.