NEC SV8500, Manual

Page: 721 / 3438

VOL.2-468
MCMG Card [SCA-7COTA]
6. Setting the communication speed for LAN interface:
Note:
The DUPLEX setting is not shown when Auto Negotiation (AUTO) is selected in the Speed setting.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
7. Setting IP Address and Net Mask:
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
Note:
The designated IP address cannot be applied when the DHCP is set to Enabled. Assign the DHCP setting
to Disable before performing this IP address assignment.
Line 1: -
Line 2: Select the communication speed.
AUTO=Auto Negotiation (default)
100M=100 Mbps fixed mode
10M=10 Mbps fixed mode
Line 3: Select the Duplex mode.
FULL=Full Duplex mode
HALF=Half Duplex mode
Line 4: Result is shown.
MC-MG> SET INTERFACE
SPEED (AUTO/100M/10M): 10M
DUPLEX (FULL/HALF): HALF
Ethernet Speed setting succeeded.
Line 1: Enter the IP Address, then Subnet Mask after a
space.
e.g.)
IP Address = 150.10.1.100,
Subnet Mask = 255.255.255.0
Line 2: Result is shown.
MC-MG> SET IPADDRESS 150.10.1.100 255.255.255.0
IP Address setting succeeded.