NEC SV8500, Manual

Page: 3138 / 3438

VOL.3-651
CHAPTER 4 CONFIGURATION SETUP
D
E
STEP 17: The LCD displays the [1st Server Address] setting screen.
STEP 18: If there are backup SIP servers in the network, continue assigning 2nd, 3rd and 4th
SIP server addresses.
STEP 19: The LCD displays each of the [Server Address] setting screen.
FQDN
IP address
[1st Server address]
*'For'.'
0. 0. 0. 0
BK IP/URI Cancel OK
[2nd Server address]
*'For'.'
0. 0. 0. 0
BK IP/URI Cancel OK
[1st Server address]
*'For'.'
BK IP/URI Cancel OK
Use "*" to separate each bytes.
Press the software key for "OK" when all settings are complete.
Press the software key for "OK" when all settings are complete
and return to [Server Address] menu.
Assign the IP address of SIP server using
digit keys.
Note:
About IP address of SIP server, refer to related part of
Volume 1 in this manual.
As in STEP 17, specify the SIP server by IP address or
FQDN.
Assign fully qualified domain name of SIP server using digit
keys. 0-9, A-Z, a-z, *, #, . (period), - (hyphen),
and _ (underscore) is available to use for domain
name entry (maximum 128 characters).
Press the software key for "OK" when all settings are complete.
Press the software key for "IP/URI" to switch the mode to URI
entry.
- Select "2" to assign the second SIP server
- Select "3" to assign the third SIP server
- Select "4" to assign the fourth SIP server
Depending on the way to specify SIP server; by IP address or FQDN, perform either of the
following:
When specifying the SIP server by IP address:
When specifying the SIP server by FQDN:
Note:
DNS server's assignment is necessary when using fully qualified domain name.
See "IP Address Setting for DNS Server" for details.
[Server Address]
1.1st Server Address
2.2nd Server Address
3.3rd Server Address
Exit