NEC SV8500, Manual

Page: 3254 / 3438

VOL.3-767
CHAPTER 4 CONFIGURATION SETUP
STEP 35: The LCD displays [Download Menu] screen. Select "1. Download Files."
[Download Menu]
1.Download Files
2.Download Address
3.Protocol
Exit
STEP 36: On [Download Files] menu, select the download file type and then press the software key for "OK."
[Download Files]
1.Config
2.Certificate
3.Boot & Program
Exit
H
G
- Configuration file, select "1. Config"
- Boot & Program file, select "3. Boot & Program"
- Flash memory image file, select "4. Flash Memory Image"
- Voice file, select "6. Voice File"
- Translation data file, select "7. Language Pack"
[Boot & Program]
itlisipv.tgz
BK Cancel Exec
STEP 37: File name is displayed for each selected download file.
Change the download file name
Not change the download file name, chack the file name and
press the software key for "Exec."
This is an example for selecting Boot & Program file.
Go to STEP 38
Go to STEP 39
STEP 38: When you want to change the download file name, perform this step.
[Ring Tone]
ringmusic.wav
BK Cancel Exec
1. Press the software key for "BK" to delete the displayed file name.
2. Enter other name (up to 20 characters).
3. Press the software key for "Exec".
Go to STEP 39
Note 1:
For firmware versions earlier than 4.0.0.0
(except for DT730G), displayed as "Translation Data."
Note 1
Note:
See [How to Enter Characters on Configuration Menu] for the way to enter characters.
Note:
See Download file on page 758 for the default file name of each type.