NEC SV8500, Manual

Page: 1810 / 3438

VOL.2-1557
MG-SIP128 [MG-128SIPMGJ]
Note 2:
Display changes depending on the registration status:
When MG-SIP128 is trying to register:
Now Registrating.
After MG-SIP128 successfully registered: Registration is OK. (DRS IP address 192.168.0.1)
(The IP address succeeding in registration appears
as well.)
Note 3: This displays only when Call Hold function is enabled.
• If displaying status of registration to SIP network (when the registration function per number is disabled)
Note 4:
Display changes depending on the registration status:
When MG-SIP128 is trying to register:
Now Registrating.
After MG-SIP128 successfully registered: Registration is OK.
After MG-SIP128 fails to register: Registration is NG. Waiting Re-Registration timer.
(MG-SIP128 is trying to register again)
When registration is disabled: Register Server Configuration data is not set.
(No setting data of “set sip_register” command)
IPX Registration Information
Registration is OK. (DRS IP address
192.168.0.1)
Note 2
------------------------------------
Call Hold function start time
：
Sat
Aug 27
21:00:22 2011
Keep Calling count
：
xx
Cancel count(IPX)
：
xxx
Cancel count(SIP)
：
xxx
Call Hold function start time Note 3
Keep Calling count: xx
Cancel count(IPX): xxx
Cancel count(SIP): xxx
Now ： Sat Aug 27 22:22:22 2011
Present time
MG(SIP)> show status
0:Port status
1:IPX status
2:SIP status
3:CH status
9:Exit
0: Port status (Default)
1: Telephony Server network registration status
2: SIP network registration status
3: Information of channels in use
9: Exit
Select a reference number:2
SIP Registration Information
Registration is OK.
Note 4