NEC SV8500, Manual

Page: 3430 / 3438

APP-2
APPENDIX A Power Over Ethernet Specifications For Terminals
1. Power Over Ethernet InLine Power Adaptor (ILPA-R)
The SW1 located in the bottom of ILPA is used as the Power Switch. The settings of the terminals required for
the PoE switch conditions are as follows:
Table APP-1 Terminal/ILPA to PoE Switch Conditions
TREMINALS
INLINE POWER ADAPTER
SWITCH CONDITION
PoE SWITCH PROTOCOL
TYPES
PoE SWITCH
CONDITION
ITR-4D-3 802.3af CDP (Position 1) Cisco Discovery Protocol (CDP)
ITR-4D-3 802.3af NDP (Position 2)
NEC Discovery Protocol (NDP) for
Power Patch and BF200/24 (PoE)
ITR-xx-1
ITR-xx-2
DTR-xx with IP-R
NDP
(Position 1)
802.3af (Position 1) 802.3af
ITR-8D-3
ITR-16D-3
ITR-16LD-3
ITR-32D-3
802.3af
(Position 1)
NDP (Position 2)
NEC Discovery Protocol (NDP) for
Power Patch and BF200/24(PoE)
INASET
Classic
NDP
(Position 1)
802.3af (Position 1) 802.3af
INASET 240G
INASET 320G
INASET 320C
802.3af
(Position 1)
NDP (Position 2)
NEC Discovery Protocol (NDP) for
Power Patch and BF200/24(PoE)
Table APP-2 ILPA Power Switch Setting
SWITCH POSITION CONDITION NOTE
Position 1
(Default)
- CDP
- 802.3af (example BF210/24(PE)) Set to this switch position when PoE switch
supports either CDP or 802.3af.
Position 2 NDP for Power Patch and BF200/24(PoE)
Set to this switch position when PoE switch
supports either NDP or 802.3af.