NEC SV8500, Manual

Page: 524 / 3438

VOL.2-271
MC & MG with PFT
6. Setting Fax receiver PAD value:
Note:
The FAXRECVPAD command assigns the value to decrease the Fax signal level in the receiver (IP to an-
alog terminal) direction when the Fax signal is detected.
Note:
The total PAD value (Receiver PAD + Fax Receiver PAD) is limited to 20dB.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
7. Setting Fax sender PAD value:
Note:
The FAXSENDPAD command assigns the value to decrease the Fax signal level in the sender (analog ter-
minal to IP) direction when Fax signal is detected.
Note:
The total PAD value (Sender PAD + Fax Sender PAD) is limited to 20dB.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
8. Setting Internal Music-on-Hold type:
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
Line 1: Enter the Fax Receiver PAD value in the range
of 0-20 after the command name (default=3)
Line 2: Result is shown
MC-MG> SET FAXRECVPAD 3
Fsx Receiver PAD setting succeeded.
Line 1: Enter the Fax Sender PAD value in the range of 0-
20 after the command name (default=0)
Line 2: Result is shown
MC-MG> SET FAXSENDPAD 0
Fax Sender PAD setting succeeded.
Line 1: Select the Music-on-Hold type in the range of 0/1
0=Minuet (default)
1=For Elise
Line 2: Result is shown
MC-MG> SET MUSICTYPE 1
Music on Hold Type setting succeeded.