NEC SV8500, Manual

Page: 992 / 3438

VOL.2-739
MG-BRI
ARTD: Assignment of Route Class Data
Assign the Route Class Data of Virtual Speech Channel.
CDN65(INT): Interface Specification for ISDN.
Note:
Refer to ARTD section in the Command Manual for your country’s specification.
CDN60 (TC/EC)=1 (TC)
CDN114 (DCH)=1 (Channel Integration Enabled)
Note:
To change the data for existing route (RT), initialize or reboot the trunk device such as circuit card, MG, or
VS-32.
ARTI: Assignment of Trunk Application Data
Assign the application data for Trunk in Virtual Speech Channel.
CDN68 (VIR)=2 (MG connection)
Note:
To change the data for existing route (RT), initialize or reboot the trunk device such as circuit card, MG, or
VS-32.
ATRK: Assignment of Trunk Data
Assign the Trunk Data to Virtual Speech Channel.
The example of data setting procedure is shown below.
Note:
Virtual trunk occupies one group. For example, if one channel is registered for Virtual Trunk, the group is
occupied exclusively for the Virtual Trunk.
Note:
Do not assign any trunk data to Group 0 of Unit 0 in even number Module Group because it cannot be used
with MG-BRI.