NEC SV8500, Manual

Page: 1137 / 3438

VOL.2-884
MG(BRI) [SCA-2BRIA/MG-2BRIA]
Note 2:
LAN1 of the Telephony Server is used for the communication between SIP server and MG(BRI). So assign
IP address of LAN1 on the Telephony Server here. In the case of Dual Configuration, assign IP address of
LAN1 on Telephony Server#0.
F
Ethernet Speed set
Assign the LAN interface data.
Note:
DUPLEX setting is not displayed when Auto negotiation is selected.
Note:
Assign the proper speed adjusting the network devices (router, HUB) on the destination.
F
Signaling Port Number set
Assign the port number of PHI signaling [PHI = internal controlling function in SIP server (i.e. SP-PHI)].
Note:
Specify the same port number assigned on SIP server.
--- Ethernet Speed set ---
Current LAN Speed: 100MBPS_FD
Current data setting is displayed.
Change LAN Speed? [Y (change)/N (current)/
Q(quit)]: y
Asked whether to change the displayed data.
Y: To change the displayed data
N: Not change
Q: Quit Standard mode
Input new Speed [1 (AUTO)/2 (100M)/3(10M)]: 1 Select the transmission speed of LAN interface.
1: Auto negotiation (default)
2: 100 Mbps fixed mode
3: 10 Mbps fixed mode
--- Signaling Port Number set ---
Current Signaling Port Number: 64000
Current data setting is displayed.
Change Signaling Port Number? [Y (change)/N (cur-
rent)/Q(quit)]: y
Asked whether to change the displayed data.
Y: To change the displayed data
N: Not change
Q: Quit Standard mode
Input new Signaling Port Number (1024-65535):
65000 Enter the port number of PHI signaling.
Port number: 1024~65535
(default = 64000)