NEC SV8500, Manual

Page: 1796 / 3438

VOL.2-1543
MG-SIP128 [MG-128SIPMGJ]
2=Common Config Data
Common Config Data=Common
configuration data
3=Port Config Data
Port Config Data=Port configura-
tion data
4=SIP Config Data
SIP Config Data=SIP configura-
tion data
5=Route Config Data
Route Config Data=Route infor-
mation configuration data
6=Multipoint Data
Multipoint Data
9=Exit End of show command
Select a reference number:4
Select “4”.
set sip_server: Currently assigned common con-
fig data will be displayed.
Server type :IP Address
Server IP Address :0.0.0.0
When FQDN is set by a SET com-
mand “sip_server”, “SIP server
FQDN”, not “SIP server IP
Address”, is displayed.
Displays the current setting of the
Server IP Address.
SIP server Port Number :5060
SIP server Router type :Strict
Domain Name :0
-------------------------------------------------
set sip_register:
SIP register type :IP Address
SIP register IP Address :0.0.0.0
Displays the current setting of the
SIP register IP Address.
SIP register Port Number :5060
SIP register Expires time :3600sec
-------------------------------------------------
set keynumber:
Keynumber :0