NEC SV8500, Manual

Page: 3259 / 3438

VOL.3-772
CHAPTER 4 CONFIGURATION SETUP
The LCD can list three lines for DT750/DT730/DT730G Series and two lines for DT710 Series per page.
Pressing the software key for “Up” and “Down” will scroll one line up/down.
Menu List
[2] Exit Online Monitoring Menu
Pressing the “Exit” key (lower left of the LCD) or the software key for “Exit” will close the Online Moni-
toring Menu.
[3] Operation in Online Monitoring Menu
• The following sections explain the terminal operation in Online Monitoring menu using DT730/
DT730G Series as an example procedure.
• Pressing the software keys for “Up” and “Down” will scroll one line up and down (
Note 1
). Cursor key
cannot scroll the menu.
Note 1:
The software keys for “Up” and “Down” are displayed only when scrolling is required for the menu list.
On DT710 Series, the software key indication differs from that of DT750/DT730/DT730G, because the
available number of lines is smaller.
• Use digit keys corresponding to the menu number to select the target menu. Enter key is not available
to confirm the selecting menu.
SIP Settings
Maintenance Settings
Security
Prev Up Down
Exit
3
4
SNMP
5
2
Network Settings
UP
DOWN
1
* An example for System Information menu.
DT730 Series (Standard LCD) DT710 Series (2-line LCD)
Exit
1.QoS
2.System Information
3.Ping
Up Down Exit
1.QoS
2.System Information