NEC SV8500, Manual

Page: 1681 / 3438

VOL.2-1428
MG-SIP128 [MG-128SIPMGG]
Session-timer :enable
When “disable” is selected by the
SET command “Session_timer”,
“disable” is displayed. In this
case, “Session-expires” and
“Refresher” are not displayed.
Session-expires :180sec
Refresher :UAC When UAS is selected for
Refresher, “UAS” is displayed.
Invite Refresher :disable When “enable” is selected for
“Invite Refresher” by the SET
command “session_timer”,
“enable” is displayed.
Forced mode :disable When “enable” is selected for
“Forced mode” by the SET com-
mand “session_timer”, “enable” is
displayed.
set prack:
Supported 100rel :enable
When “disable” is selected by the
SET command “prack”, “disable”
is displayed.
Stop cyclical-send of 18x :disable
“enable” may be displayed
according to the setting.
When “set prack” is disabled,
nothing is displayed.
-------------------------------------------------
set cdn_pattern:
Prior Called Party Number pattern:To[userinfo]
When “Request-URI[isub]” is
selected by the SET command
“cdn_pattern”, “Request-
URI[isub]” is displayed, and when
“Request-URI[userinfo]” is
selected, “Request-URI[userinfo]”
is displayed, and “P-Called-Party-
ID” is selected, “P-Called-Party-
ID” is displayed.
-------------------------------------------------
set sip_port_no:
SIP Port Number :5060