NEC SV8500, Manual

Page: 1490 / 3438

VOL.2-1237
MG(PRI) (2M) [SCA-30PRIA/MG-30PRIA]
When P1=1 (Primary DRS) is not entered:
When P1=1 (Primary DRS) is entered:
6. SHOW Δ DRSQOS
This command is used to display the QOS setting for DRS session. The following is an example in the case
of TOS setting.
MG-PRI(SIP)>SHOW DRSADDRESS
Primary DRS Address 10.41.1.100, Port 3456
The current setting is displayed.
Secondary DRS Address 10.41.1.101, Port 3457
Tertiary DRS Address 10.41.1.102, Port 3458
Fourth DRS Address 10.41.1.103, Port 3459
MG-PRI(SIP)>SHOW DRSADDRESS 1
P1 -Select the DRS to be displayed.
1 =Primary DRS
2 =Secondary DRS
3 =Tertiary DRS
4 =Fourth DRS
Primary DRS Address 10.41.1.100, Port 3456
The current setting is displayed.
MG-PRI(SIP)>SHOW DRSQOS
The current setting is displayed.
- QOS
- PRECEDENCE (
0-7 (low-high))
- Delay ( 0/1 =Normal/Delay)
- THROUGHPUT ( 0/1 =Normal/High Throughput)
- RELIABILITY ( 0/1 =Normal/High Reliability)
- COST ( 0/1 =Normal/Cost Precedence)
- DSCP (0-63)
DRS QoS is 0xC0.(QOS = TOS)
PRECEDENCE =6
DELAY =0
THROUGHPUT =0
RELIABILITY=0
COST =0