NEC SV8500, Manual

Page: 772 / 3438

VOL.2-519
MG-COT Card [SCA-6COTA/SCA-6COTC]
4. Port Number
The following provides the port number to be used in this system.
• When using Proprietary Protocol Mode
When using SIP Mode
Note 1:
The packet between TP and SP (“TP
⇔
SP” in the table) does not flow over the network because both of
which are part of the Telephony Server.
Note 2:
The packet related to SP internal control port does not flow over the network.
Port Number
Path Function Note
3456/UDP
DRS
(Telephony Server LAN1)
Registration
Changing an initial value by using
ADTM command.
3457
/UDP
MG-COT Registration -
50001/UDP MG-COT iLP-PM -
1024~ /TCP Peer to Peer H.245 Allocated by Operating System
1024~64510/UDP Peer to Peer RTP
Changing an initial value by using
the configuration command. [SET
STARTPORT] from a local con-
sole.
Function
TP side SP side
LAN Port
(default)
Port Number
(default)
Command to
Change Setting
Port Number
(default)
Command to
Change Setting
TP
⇔
SP
Note 1
Registration LAN1 3456
ADTM
(Port Number only)
22000 Cannot be changed
iLP-PM LAN1 60130
ADTM
(Port Number only)
64105 ALIDL
SP Internal
Control Port
Note 2
iLP-PM - - -
64010 ALIDL
22001 ASPC
MG-COT
⇔
SP
SIP - - - 5060 Cannot be changed
H.245
Negotiation
Ready - - - 22002 ASPC
H.245 - - - 22003 ~ 26000 ASPC