Copyright © 7thSense Design Ltd : M732-1
June 2022
Specification
Environmental Characteristics
Operating
Non-operating
Temperature
+15 to +30
°
C
-10 to +50 °C
Humidity (non-condensing)
10 to 90%
5 to 95%
Altitude
<2000 m
<10000 m
Regulatory Compliance Statements
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with this user guide, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his
own expense.
European Union
This is a Class A product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
End of Service Life
Dispose of the equipment and any components in accordance with all local and
national safety and environmental requirements.
Medialon MAS Pro Dante D and DC
Hardware User Guide
2022 model
Customer Support Portal: https://portal.7thsense.one
Support
If your MAS Pro Dante was purchased through one of our regional distributors, please contact
your supplier directly for support.
Visit our customer support portal where you can find a wide range of support documentation
and video tutorials, together with contact information.
Warranty
Standard warranty is 24 months, return-to-supplier. Please contact your supplier if you require
an extended warranty. Please ask for instructions and request authorisation before returning a
server to your supplier.
Operating Instructions
Operating instructions for your server can be found in the Online User Guides section of the
customer support portal.
Handling and Installation
Unpacking
Unpack your MAS Pro Dante carefully onto a clean and level surface and examine it for any
signs of transit damage. Contact your supplier immediately if anything appears to be damaged,
or any parts missing. Please retain all packaging in case of future need to return a server.
Lifting
MAS Pro Dante weight depends on model, the weight is stated below and on the server’s
product label. Especially when manoeuvring them into a rack or at height, observe your internal
manual handling recommendations to avoid injury.
Rack mounting
The MAS Pro Dante is a 2U device, supplied with rack mount slide rails and fixings. Installation
instructions are included with the slide rails.
Ensure that each server is properly secured to the rack cabinet using M6 rack mount bolts.
Rack stability warnings:
•
Ensure the rack is stable (e.g. bolted to the floor) before sliding out the server.
•
Do not place objects on equipment projecting from a rack (e.g. do not use as a shelf).
•
Only slide out one piece of equipment from the rack at a time.
Product
Electrical Rating
Weight (kg)
Dimensions (H
×
W
×
D)
MAS Pro Dante DC 100-240V, 7-3.5A, 60-50Hz
18
2U
×
483 mm
×
545 mm
MAS Pro Dante D
100-240V, 7-3.5A, 60-50Hz
17.5
2U
×
483 mm
×
545 mm
7thSense Design Ltd
: 2 The Courtyard, Shoreham Road, Upper Beeding, BN44 3TN, UK
www.7thsense.one
