NEC SV8500, Manual

Page: 3428 / 3438

VOL.3-941
CHAPTER 4 CONFIGURATION SETUP
Note:
Use the Internet Explorer’s function to search or to save the logs on a file.
Note:
See the table below for the meaning of the message displayed on the Conclusion row:
Conclusion Meanings Countermeasures
success
Succeeded in executing the selected
operation.
-
Terminal busy.
Failed in downloading the file
because the terminal is in busy state.
Release the call.
File does not exist.
Corresponding download file cannot
be found.
• Execute “Firmware Upload” again.
• Execute “Setup of Firmware auto-
matic update” again.
Hardware version error. Hardware version error is detected.
This tool does not support the
selected terminal.
Terminal error. Other error is detected.
• Execute downloading again.
• There is a possibility of terminal’s
hardware failure.
Config file parse error.
Error is detected on the auto update
setting file.
Check the setting on “Setup of
Firmware automatic update” again to
make sure the condition is correct.
*This error is output only when the
condition is equal (==) between the
current firmware version and the
update firmware version.
Config file read error.
Error is detected on the auto update
setting file.
Check the setting on “Setup of
Firmware automatic update” again to
make sure the condition is correct.
*This error is output when any
irregular characters or numbers are
entered.