NEC SV8500, Manual

Page: 2080 / 3438

VOL.2-1827
MG-SIP16 [SCA-16SIPMGA/MG-16SIPMGA]
43 SET Δ SIP_ROUTE
This command is used to specify route information in the SIP side network. The registered number of the
route information is up to 10.
44 SET Δ SIP_RTP_PORT_NO
This command is used to specify the base RTP port number from SIP network.
Note 1:
The value must be assigned by an even number.
45 SET Δ SIP_SERVER
The command specifies the IP address or the Fully Qualified Domain Name (FQDN) of a SIP proxy server.
Note 1:
Pressing the Enter key can skip the item. However,“SIP server type” and “IPaddress/FQDN” cannot be
skipped.
When IP address (=0) is selected
:
MG(SIP) > set sip_route
See SET IPX_ROUTE command for more details.
MG(SIP) > set sip_rtp_port_no
SIP side RTP port number (1024-65024): 50000
• Assign the base RTP port number for SIP side (default: 50000)
Note 1
MG(SIP) > set sip_server
SIP server type(0=IP address/1=FQDN):_
• Select the type of the proxy server.
0: IP address
1: FQDN
MG(SIP) > set sip_server
SIP server type(0=IP address/1=FQDN):0
SIP server IP address: 192.168.100.100
SIP server port number(1024-65535): 5060
Strict or Loose(0/1): 0
Domain Name(MAX128):_
• When IP address (=0) is selected.
• Assign the IP address of the proxy server (default: 0.0.0.0).
• Assign the port number of the proxy server (default: 5060)
• Select a Strict router or Loose router for the proxy server (default:
0).
0: Strict router
1: Loose router
• Input a string that specifies the service provider in a maximum of
128 characters.