NEC SV8500, Manual

Page: 1136 / 3438

VOL.2-883
MG(BRI) [SCA-2BRIA/MG-2BRIA]
F
SIP Server IP Address & Host Name set
Assign the IP address, port number, and host name of SIP server.
Note 1
Note 1:
SIP server refers to the Telephony Server.
--- SIP Server IP Address & Host Name set ---
Current SIP Server/IP Address/Port Number/Host Name:
SIP Server
IP Address Port Number Host Name
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20 0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0 0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0 blank
blank
blank
blank
blank
blank
blank
blank
blank
blank
blank
blank
blank
blank
blank
blank
blank
blank
blank
blank
Current data setting is displayed.
Change SIP Server Information? [Y (change)/N (cur-
rent)/Q(quit)]: y
Asked whether to change the displayed data.
Y: To change the displayed data
N: Not change
Q: Quit Standard mode
Input new SIP Server (1-20): 1
Enter the SIP server number.
Input new IP Address: 10.41.1.150
Enter the IP address of SIP server.
Note 2
Input new Port Number: 5060
Enter the port number of SIP server.
Is there the Host Name? [Y/N]: y
Asked whether to use host name.
Y: Use host name
N: Not use host name
Input new Host Name: SVR1.nec.com
Enter the SIP server’s host name in full-domain.
(up to 63-byte of characters, . (period) and -
(hyphen) is available)
Continue? [Y (continue)/N (exit)]: n
Asked whether to continue this command setting.
Y: Continue this command to set other SIP
server data
N: Go on to the next command