NEC SV8500, Manual

Page: 845 / 3438

VOL.2-592
MG-COT Card [SCA-6COTA/SCA-6COTC]
Note:
The FAXSENDPAD_MG command assigns the value to decrease the Fax signal level in the sender (IP to
PSTN) direction when Fax signal is detected.
Note:
The total PAD value (Sender PAD + Fax Sender PAD) is limited to 20dB.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
13. Setting Health Check Receive Timer
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
Fax Sender PAD setting succeeded.
Line 2: Result is shown.
MG-COT > SET HC_TIMER P1
Line 1: Enter the time (second) in the
range of 120-240 (at intervals of
30 seconds) (default=150).
Health-Check Timer Timeout setting succeeded.
Line 2: Result is shown.