NEC SV8500, Manual

Page: 2947 / 3438

VOL.3-460
CHAPTER 4 CONFIGURATION SETUP
STEP 4: The display changes as follows. Choose either “0. Automatic”, “1. ON” or “2.OFF” by pressing each
digit key. Then press the OK key.
0. Automatic: Follow the setting on the System. If no setting is made in the System, the default
setting (DTMF=OFF/RTP Alarm=ON) is applied.
1. ON: Follow the setting on the terminal (ON).
2. OFF Follow the setting on the terminal (OFF).
STEP 5: Go back to the Administrator Menu (Page 1) by pressing “0” key on the Page 2. Then, go back to the
User Menu by pressing the Exit key. On the User Menu, press the Save key to save the setting data.
OK
0.Automatic
1.ON
Up Down Cancel
[Administrator Menu (Page2)] [Administrator Menu (Page1)]
Save
1.DHCP Mode
2.DRS Address Primary
Up Down Cancel
Exit
1.DtermIP Mode
2.Download Address
Up Down
5.RTP Alarm
0.Next Page (P2>>P1)
Up Down
[User Menu]
Press “0” key.
Press “Exit” key. Press “Save” key.