NEC SV8500, Manual

Page: 763 / 3438

VOL.2-510
MG-COT Card [SCA-6COTA/SCA-6COTC]
Trunk Line Appearance-D
Connecting an analog C.O. trunk and a virtual line one-to-one, this feature allows DtermIP user to directly
access C.O. line of MG-COT by pressing corresponding Line key on DtermIP station, without dialing ac-
cess code. DtermIP station can also answer incoming calls from C.O. line by pressing the Line key.
Follow the service conditions below to use this feature by MG-COT:
(a) System data assignment for Trunk Answer from Any Station (TAS) is required for this feature, but
the TAS service is not activated.
(b) Whether the Trunk Answer from Any Station (TAS) feature is available or not is determined by the
Service Feature Restriction Class (SFC: 34) setting to each station.
(c) When Trunk Line Appearance-D station does not answer the incoming call and Call Forwarding-
Don’t Answer is activated, the LCD on the DtermIP does not display to inform the execution of call
forwarding.
(d) Analog C.O. line corresponding to PB signal is only applicable.
(e) DtermIP stations must assign a My Line on Line/Feature key beforehand.
(f) All the virtual lines of C.O. trunk, excepting My Line, can be assigned as Trunk Line Appearance-D
lines on one DtermIP station. (e.g. On 16-button type of DtermIP station, a maximum of 15 lines can
be accommodated as Trunk Line Appearance-D. The remaining one line is the My Line.)
(g) Up to 128 of C.O. lines can be accommodated as Trunk Line Appearance-D per system.
(h) Distinctive Ringing is not activated when incoming call terminates.
MG-COT DtermIP
Analog
Telephone
2
5
8
0
OPER
TUV
JKL
ABC
3
6
#
9
DEF
MNO
WXYZ
1
4
7
GHI
PQRS
Directory
Message
Speaker
Answer
Redial
Recall Feature
Mic Conf
Hold Transfer
Exit Help
7
1
2
3
4
5
6
8
9
10
11
Line/
Feature Key
Route Name: COT-3
Route Name: COT-1
Route Name: COT-2
PSTN
FRONT
MG1 MG3 MG5
MG0 MG2 MG4
ALM PWR
Ether
MG6
OPERATION
MG0 MG2 MG4 PFT
MG1 MG3 MG5
ON
LINE
100M LINK CONSOLE
RESET
MUSIC