NEC SV8500, Manual

Page: 1566 / 3438

VOL.2-1313
MG-T1(SIP) [SCA-24DTIA]
F
Setting multiframe format and equalizer (transmission distance) data for T1 interface:
F
Setting optional data for T1 interface:
F To stop SETUP T1 command and save the changed data:
---Mandatory Setting---
1.Multiframe (0:24MF/1:12MF)[0]:
1
2.Equalizer
(0:0-40m/1:40-80m/2:80-120m/3:120-162m/4:162m-)[4]:
0
---Optional Setting---
1. All Ch Make Busy :0*
3. Remote Alarm Sending :0*
5. Alarm Operation Mode :0*
7. Alarm Detect/Release Type :0*
9. 4K Data Link
:0*
11.Haul Mode :0*
13.Simultaneous Seizure :0*
15.Layer 1 Alarm Report :0*
17.ACK Detect Guard Time :0*
19.Answer Detect Time :0*
21.Recv Signaling Pattern :0*
23.Recv Signaling A logic :0*
25.EC NLP Mode :0*
27.Clock Signal Mode :0*
2. G.704 Mode :0
4. Remote Alarm Signaling :0
6. Alarm Release Time :0
8. Line Signal :0
10.BOM/MOS Operation :0
12.4K Data Link Mode :0
14.SSD Remote Start :0
16.Call Collision Processing :0
18.ACK Detect Time
:0
20.Send Signaling Pattern :0
22.Send Signaling A Logic :0
24.EC NLP Control :0
26.EC/2100Hz Detect :0
28.Idle Code Sending :0
Setting parameters and current
setting are listed.
(*All the parameters are set to
“0” in default setting.)
Change Optional setting? [Y(change)/N(current)]: y
Enter “Y” to change the
optional setting.
Input Optional setting number (1-28): 1
Select the setting number (1-
28) to be assigned.
1. All Ch Make Busy (0:Cancel/1:Set)[0]: 1
When “1” is entered in the for-
mer step, for example, “1. All
Ch Make Busy” setting line is
displayed. Enter the data
depending on the selected set-
ting parameter.
---Optional Setting---