NEC SV8500, Manual

Page: 900 / 3438

VOL.2-647
MG-COT Card [SCA-6COTB]
Note:
Check all of the boxes for LINE0 (LV0) - LINE5 (LV5). This data setting is available only when trunk data
is assigned by ARTI/ATRK command.
CH MG Channel Number
Assign “0”.
LENS Assign Virtual Speech Channel for MG (6COT).
SETTING OF SERVICE TYPE EXISTS (SIGNALING PACKET)
Type of service for MG (6COT)
Music on hold exists
External Music on hold (default setting)
Internal Music on hold1
Internal Music on hold2
External music on hold input gain adjustment
0: 0dB
1: -10dB (gain)
2: -15dB (gain)
3: -20dB (gain)
4-15: Not used
Country Code U.K. (fixed)
Law of A/D conversion
A law (fixed)
Receive complete timing of PB direct-In [0-15]
Default value is 0.
False answer timing [0-15]
Default value is 0.
AMGVL: Assignment of Media Gateway Voice Control (LDM)
Assign the voice control data for terminal that is connected to MG (6COT). When AMGVL data is not as-
signed, AIVCL data setting is applied.
A RT (MG Storing)
Physical Route Number for Virtual Speech Channel of MG (6COT)
TYPE
Select one of the followings:
• Route Specified
• Location ID Specified
B RT (MG Storing)
Displayed when TYPE=Route Specified is selected.
Physical Route Number for Virtual Speech Channel of terminal connected to MG
B LOC-ID:Location ID of IP terminal connected to MG (6COT)
Displayed when TYPE=Location ID Specified is selected.
Setting of Jitter Buffer
JB_MIN:Jitter Buffer Minimum
JB_MAX:Jitter Buffer Maximum
Setting Type of Voice Packet Service
Type of service for MG (6COT)
Setting of Payload
TYPE