NEC SV8500, Manual

Page: 785 / 3438

VOL.2-532
MG-COT Card [SCA-6COTA/SCA-6COTC]
<Related to MF>
CDN 72 MFSP
Sending Speed (0-15)
CDN 73 KPPT Duration of KP sending (0-15)
CDN 74 KPST Pause after KP sending (0-15)
CDN 75 MT Step Code (0/1)
<Ground Start>
CDN 15 LSG = 1
Ground Start is available
Note:
To change the data for existing route (RT), initialize or reboot the trunk device such as circuit card, MG, or
VS-32.
ARTI: Assignment of Trunk Application Data
Assign Trunk Application Data for Virtual Speech Channel.
CDN68 VIR = 2
MG connection
When using fax connection via MG, following assignment is necessary.
CDN 71 IP FAX data
CDN 72 Jitter Buffer Size for IP FAX
CDN 73 Payload Type for IP FAX
CDN 74 Payload Size for IP FAX
Note:
To change the data for existing route (RT), initialize or reboot the trunk device such as circuit card, MG, or
VS-32.
ATRK: Assignment of Trunk Data
Assign the Trunk Data for Virtual Speech Channel.
The example of data setting procedure is shown below.
Note:
Virtual trunk occupies one group. For example, if one channel is registered for Virtual Trunk, the group is
occupied exclusively for the Virtual Trunk.
Note:
Do not assign any trunk data to Group 0 of Unit 0 in even number Module group because it cannot be used
with MG-COT.