NEC SV8500, Manual

Page: 1321 / 3438

VOL.2-1068
MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]
14.4.2 How to Back Up and Restore Config Data by TFTP Connection (Remote Download)
This config download/upload is performed via TFTP.
Prepare the following:
- PC that is capable of Telnet and TFTP features.
- All the PCs have to belong to the same segment with MG(PRI).
- TFTP server has to be installed in advance.
- PCPro has to be installed in advance.
- MG(PRI) is already registered to system and it is operating normally.
• Backing Up Config Data via TFTP
Make sure of the connectivity in the following:
- Make sure that PCPro is able to log on to the Telephony Server.
- Check the connectivity from TFTP server to the Telephony Server by using Ping command.
- Make sure that TFTP client is able to connect to FTP server.
<Data Assignment on TFTP Server>
STEP 1
Create a folder to back up configuration data.
STEP 2
Start the TFTP server program.
STEP 3
Assign the folder as root folder, and then permit write and read behavior for this directory. For
more information, refer to the appropriate manual attached to the TFTP server program.
<Data Assignment on PCPro>
STEP 4
To search for the LENS of the target MG(PRI), use the IPAN command.
IP Network
TFTP Server
PCPro
Telnet PC
SYSTEM
MG(PRI)
Configdata
(3) Connect to control MG(PRI) via
Telnet
(3) Connect to control MG(PRI) via
Telnet
(2) Make environment setting for Telnet
(1) Make environment setting for TFTP
(4) Copy a config file into TFTP Server via TFTP
Note 1
:
PCPro and Telnet both can be performed by single Personal Computer.
Note 1
Note 1
B D
ALM PWR
ON
LINE LB
LINE Ether
100M LINK CONSOLE
RESET
MUSIC