NEC SV8500, Manual

Page: 3324 / 3438

VOL.3-837
CHAPTER 4 CONFIGURATION SETUP
3. Data Clear
Initializes DT700 Series selecting the
initialization mode.
- X X X
1. Factory Value Initializes DT700 Series to factory default. - X X X
2. Terminal Data Clears terminal data on DT700 Series. - X X X
3. Personal Data Clears personal data on DT700 Series. - X X N
4. Adjust Adjusts LCD, audio, and button kit. - X X X
1. Audio Sets audio data. - X X X
1. Sidetone Volume Sets Side Tone volume [0-7, 9 for Auto].
DT750: 9
DT730: 9
DT710: 4
X X X
2. Send Gain Sets sending gain of handset [0-31, 99].
DT750: 99
DT730: 99
DT710: 24
X X X
3. Receive Bias Sets receiving bias of handset [0-7, 9].
DT750: 9
DT730: 9
DT710: 0
X X X
4. Receive Gain Sets receiving gain of handset [0-31, 99].
DT750: 99
DT730: 99
DT710: 22
X X X
5. Noise Suppression
Note 13
Sets whether to enable the Noise Suppressor.
(Set “1.Disable” in normal operation.)
Disable X X X
1.Disable Sets to disable the Noise Suppressor.
2.Enable Sets to enable the Noise Suppressor.
2. KeyKit Type Sets additional button kit data. - X X X
1. Kit 1 ~ 4. Kit 4,
8. Kit 8 ~ 12. Kit 12,
16. Kit 17
Note 10
,
Note 11
,
Note 12
Key 1 ~ 4, 8 ~ 17 on button kit are used.
* Kit 8 is not displayed on DT750.
*Kit 17 is displayed on DT750 only.
DT750: Kit 1
DT730: Kit 1
DT710: Kit 9
X X X
1. Line Key Type
Sets Line key.
* Available for DT730 Series (Standard LCD)
excepting DESI-Less Phone.
DT750: Line 12
DT730: Line 12
DT730 (DESI-
Less): Line 8
DT710: Line 2
X X X
1. Line 12 Sets to 12-line of DT730. X X X
2. Line 24 Sets to 24-line of DT730. X X X
3. Line 32 Not used. - - -
4. Line 8 Sets to 8-line of DT730 DESI-Less Phone. X X X
5. Line 6 Sets to 6-line of DT710. X X X
6. Line 2 Sets to 2-line of DT710. - - X
7. Line 0 No Line key setting. X X X
3. Calibration Note 7 Adjusts touch-sensitive panel location. - X - -
5. Auto config Selects whether to use auto-config function.
Enable X X X 1. Disable Auto config is not used.
2. Enable Auto config is used.
0. Config
(Continued)(Not Earlier than FW 2.0.0.0 but Earlier Than FW 5.0.0.0)
Parameter Description Default
DT750
Series DT730
Series DT710
Series