NEC SV8500, Manual

Page: 3182 / 3438

VOL.3-695
CHAPTER 4 CONFIGURATION SETUP
STEP 8: Select “2. Enable” (VLAN tag is attached to EAP packet). Click the “OK” button.
Note 1
STEP 9: Select [Network Settings] → [Advance Settings] → [LAN Port Settings] → [VLAN Mode].
STEP 10: Select “2. Enable.” Click the “OK” button.
STEP 11: Select [Network Settings] → [Advance Settings] → [LAN Port Settings] → [VLAN ID].
STEP 12: Enter VLAN ID. The value must be within 0–4094. Click the “OK” button.
STEP 13: Select [Network Settings] → [Advance Settings] → [LAN Port Settings] → [VLAN Priority].
STEP 14: Enter VLAN Priority. The value must be within 0–7. Click the “OK” button.
STEP 15: Click the “Save” button.
Note 1:
When the user selects “2. Enable” in “EAP VLAN Mode,” VLAN tag will be attached according to the fol-
lowing data settings:
• VLAN Mode
• VLAN ID
• VLAN Priority