NEC SV8500, Manual

Page: 3026 / 3438

VOL.3-539
CHAPTER 4 CONFIGURATION SETUP
STEP 9:Press Save key on the Main Menu to save the assigned data.
4.1.6.2 PC Port Settings
On the PC Port Settings parameter, set the PC port-related data.
STEP 1:Select “6. Advanced Settings” by pressing “6” key on the Network Settings Menu.
Network Settings Menu
STEP 2:Advanced Settings Menu appears. Select “2. PC Port Settings” by pressing “2” key on the Advanced
Settings Menu.
Note:
PC Port Settings cannot be selected on DtermIP(SIP) that does not have the PC port (ITN-4D).
Advanced Settings Menu
STEP 3:PC Port Settings Menu appears.
Select “1. Speed & Duplex” by pressing “1” key to set LAN speed and communication method (full-
duplex or half-duplex) for the PC port.
Select “2. Port VLAN Mode” by pressing “2” key to set the PC port VLAN Mode.
Select “3. Port VLAN ID” by pressing “3” key to set the PC port VLAN ID.
Select “4. Port VLAN Priority” by pressing “4” key to set the PC port VLAN Priority.
Select “5. Port Available” by pressing “5” key to set the PC port availability
Select “6, EAPOL Forwarding” by pressing “6” key to select whether to enable or disable the
EAPOL Forwarding function.
Note:
“6. EAPOL Forwarding” is displayed on DtermIP (SIP) with Firmware Version 3.0.0.0 or later.
Up Down Exit
11.DHCP Mode
2.IP Address
3.Default Gateway
4.Subnetmask
5.DNS Address
6.Advanced Settings
Up Down Exit
161.LAN Port Settings
2.PC Port Settings
3.CDP Mode
4.Type of Service
5.802.1X Settings