NEC SV8500, Manual

Page: 1630 / 3438

VOL.2-1377
MG-SIP128 [MG-128SIPMGG]
[Setting Example]
Note:
The conditions of this command are as follows.
• Normally this command is not required to be changed.
• To set SIP domain, change the domain name from the “domain name” parameter of “set sip_server” com-
mand or “set_self_sip_domain” command.
(19) drsaddress
Setting of IP address and port number of DRS server
This command is used to assign IP address and port number of DRS server.
[Setting Example]
MG(SIP) > set domain
Input Domain Name.(default=0,
MAX128(strings))
:nec.com Specify the domain name. (Default: 0/Maxi-
mum: 128 bytes)
MG(SIP) > set drsaddress
[Primary DRS Setting]
Setting Primary DRS;
Input IP Address.(default=0.0.0.0)
:172.16.253.1 IP address of DRS server
(Default: 0.0.0.0)
Input Port Number.(1024-65535
(default=3456))
:3456
UDP Port number of DRS server
(Default: 3456)
[Secondary DRS Setting] Setting Secondary DRS;
Input IP Address.(default=0.0.0.0)
:172.16.253.2
IP address of DRS server
(Default: 0.0.0.0)
Input Port Number.(1024-65535
(default=3456))
:3456
UDP Port number of DRS server
(Default: 3456)
[Tertiary DRS Setting]
Setting Tertiary DRS;
Input IP Address.(default=0.0.0.0)
:172.16.253.3 IP address of DRS server
(Default: 0.0.0.0)
Input Port Number.(1024-65535
(default=3456))
:3456
UDP Port number of DRS server
(Default: 3456)
[Quaternary DRS Setting] Setting Quaternary DRS;